1. MAIN TECHNICAL SPECIFICATIONS TABLE | Parameter | Technical Specification | Type / Model | IPAL MBG 3 m³ | Treatment Capacity | 3,000 Liters / Day (3 m³/day) | Tank Length (L) | 2,000 mm (200 cm / 2.0 Meters) | Tank Width (W) | 1,160 mm (116 cm / 1.16 Meters) | Tank Height (H) | 1,270 mm (127 cm / 1.27 Meters) | Body Material | Anti-Corrosive Fiberglass Reinforced Plastic (FRP) | Inlet Pipe | PVC Ø 4 Inch (AW Standard) | Outlet Pipe | PVC Ø 4 Inch (AW Standard) | Ventilation Pipe | PVC Ø 2 Inch | Drain / Clean-out Pipe | PVC Ø 2 Inch | Inspection Port (Manhole) | 2–3 Units FRP Cover (Ø 400–500 mm) | Disinfection System | Tube Chlorinator (Chlorine Tablet Ø 2" / 3") | 2. INTERIOR COMPONENTS & FEATURES | Grease & Solids Separator (Grease & Sludge Chamber): Captures kitchen grease/oil and coarse solid deposits in the initial compartment. | Bio-Carrier / Bio-Ball Media (HDPE): Serves as a medium for the attachment and growth of waste-decomposing microorganisms. | Bio-Cell Honeycomb Media (PVC): Maximizes wastewater contact to effectively reduce BOD, COD, and TSS levels. | Tube Chlorinator: Chlorine tablet sterilization pipe to eliminate pathogenic bacteria before water discharge. | 3. TREATMENT PROCESS FLOW | Stage 1 (Pre-Treatment / Grease Trap): Wastewater enters via the inlet pipe; grease/oil and solids are separated by gravity. Stage 2 (Bio-Filtration): Water flows through Bio-Carrier/Honeycomb media, where active microorganisms break down organic pollutants.